5) new Vagcom VCDS HEX USB Interface FOR VW AUDI Skoda Seat ( up to 2017 pre MQB platform)
These are PROFESSIONALLY configured so you don’t need to do anything and you can use it straight away!
Languages Supported:
Bulgarian, Cesky, Dansk, English, Deutsch, Espanol, Francais, Greek, Hrvatski, Hungarian, Italiano, Nederlands, Norsk, Polish, Portuguese, Romania, Russian, Srpski, Suomen kieli, Svenska, and Turkish
The 2017.R3 and 2021 cars / trucks and vans ,Wow and VCDS software versions and radio decoder will be installed on the table
VW AUDI Skoda Seat Unlimited vins
General Diagnostic Information:
Car Diagnostics Scanner that supports a wide variety of makes and models, allowing various levels of interaction with the vehicle, depending upon the supported modules within the vehicle.
Features such as reading and erasing error codes that have been stored in the car computer, resetting service interval lights, as well as display of real-time data from various sensors contained in the car, are just a few of the features that are potentially supported by this versatile tool.
This is a quick and reliable diagnostic tool serving as a link between vehicle and computer. It works on both old and new vehicles.With CARS, you are able to perform brand specific diagnostics for cars and light vans from 1988 onwards.
A total of 47 different brands.
With TRUCKS software package, you are able to perform brand specific diagnostics for light and heavy commercial vehicles, buses and trailers from 1995 onwards. A total of 37 different brands. The diagnostic program GENERIC is designed for the legislation based diagnostics, specially targeted for emission related fault codes. GENERIC is included in CARS and TRUCKS packages. Multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), VPW (J1850),
PWM (J1850), RS485 (J1708), TTL and (SPI, analog in, 5volt out).
SCANNER FUNCTIONS
1. Manufacture specific serial diagnose
2. Scan function
3. EOBD/OBDII communication
4. Serial Systems
5. Engine
6. Ignition
7. ABS
8. Service reset
9. SRS
10.Immobilizer
11.Instrument
12.Comfort system
13.Gear-box
14.Coding
And many more
FLIGHT RECORDER
With the flight recorder function, you can record parameters in real time while you are driving a vehicle.
During recording, you can, with a press of a button, highlight the specific error so that you can investigate the detected error at a later time. CDP+ is equipped with built-in memory thus removing the need to bring a computer. Memory card not include in package .
VOLTAGE CHECK
When CDP+ is connected to the vehicle, the unit will check the battery voltage of the vehicle and automatically adjusts itself to the vehicle’s voltage level of 12 or 24 volts. If the voltage gets too high or too low, CDP+ will warn you with both sound and light and you will also be alerted through the battery icon in our diagnostic software.
CHASSIS NUMBER VIN
In our CARS software, we have a smart function that allows you to read out the chassis number from the vehicle that you would like to diagnose. This ensures that the right model and year is selected automatically. In addition, engine code for vehicles, which are commonly available on the markets, is also selected automatically.
COLOUR LIGHT FEEDBACK INDICATOR
The interface gives feedback using a colour indicator to show what work it is currently doing, such as communicating with the car.
ISS
Intelligent System Scan (ISS) scans through all the systems in the vehicle and displays the fault codes
that are stored in each system. This saves time and you get a quick overview of the actual status of the
entire vehicle. When the ISS is complete, you can then select a specific control system to analyse the
results further on.
ISI
Intelligent System Identification (ISI) identifies and selects automatically the type of controller that is mounted in the vehicle. This ensures that the diagnostic session is performed correctly with the correct parameters as required.
Using VCDS on a Windows PC, you can:
*read and clear fault codes from all systems within the car, e.g. engine, airbag, ABS, instruments, parking sensors etc.
*view live data from the sensors within the car
*reset service lights (both fixed and variable service intervals)
*read stored and intermittent fault codes
*graph and log live data with the car running
*automatically read fault codes from all car systems in a single search
*perform basic setting functions, adaptations and soft coding
*activate service functions, such as Electronic Park Brake (EPB) to allow brake pad changes
*supports bi-directional output test and component actuation
FUNCTIONS INCLUDE :
>Reset all service indicators (including 2010 and later Audi and VW)
>Read out live data of all your cars sensors
>Reads and clears all fault codes
>Covers all modules including airbag, ABS, engine, gearbox, central locking
>Retracts handbrake for pad change – Electronic parking brake systems
>Rear brake servo replacement
>ABS light reset
>Throttle body adaptions
>DPF regeneration
>Mileage reading and correction
>ABS Bleeding
>Full long coding
>Output tests
>TDI timing Graph
>Security access
>Freeze frame data
>Electric windows
>Key coding
>Tow bar coding
Turning on LED at coming/leaving home - dependent on if you have light/rain sensors installed
Adjusting DRL LED brightness - Default is only 9%
Turning on Fog Light cornering lights
Unlock MMI hidden menu on MMI 2G and 3G
ADAPTATION SAVING (CHANGING OF LOCKING, LIGHTS AND HORN BEHAVIOUR)
Opening and closing window using car alarm remote
Activate retrofitted DRL LED lights
Automatic turn on headlights permanently
Activate door warning lights
Activate Footwell lights
Activate Underdoor lights
Activate DLR for rear lamp lights during the day.
Remove the chrome sound for seat belt
Handbrake release without seat belt
Activate rain sensors
Removing SatNav DVD factory locked -eject button to work
Activate automatic door locking over 10mph
Activate automatic door unlocking single or multi door when key removed
Activate retrofitted Sat Nav
Activate Folding door mirrors
Dial Sweep/Needle Sweep at engine start up
Changing the stereo start up logo to S-Line or RS
Activate chirping/horn (dependent on car make) when unlocking/locking car
Restart of airbag lights
Removing the Service Due error lights
Audi Passenger Door Tilt on Reverse
Activate Activating Tyre Monitoring Pressure System TPMS
Activate Battery Meter on the MMI
Activate anything which you have retrofitted yourself
On some diesel models, a forced regeneration of the DPF is possible
